Features:

• IGBT module, all-bridge soft-switch inverter technology, high efficiency and power saving.
• Automatic protection from phase lacking, over current, over-heat, over/under voltage.
• Precise presetting of welding current, voltage and marching speed.
• CC/CV, suitable for both thin and thick wires.
• Support SAW, MMA, and gouging.
• Excellent touchable arc starting and scratching arc starting function.
• • Strong arc penetration force, different welding tractors are optional.
• • Wire feeding auto checking, while the wire connects the work-pieces well, wire-feeding stops automatically, press the wire sending/back without release, wire sending or wire unwinding will be speed up automatically, wire will be drawn back automatically after welding finish.
• Wide voltage adoption, 20%.
• Can weld mild steel and stainless steel.
• In hot wire welding, the welding wire is preheated to 500-900 C in advance before being fed into the arc area, therefore, In hot wire welding, under the same current conditions, the welding wire melting speed can be increased by about 15-50%; the heat input of the weld is reduced by 10-20%; the penetration depth is increased by 10-20%; the flux consumption is reduced by 10-30%.

Parameters